Filter System Repairs, Pool Repairs and Pool Renovation

Filter System Repairs

Filter System Repairs and Replacement Parts

Sand filter and cartridge filter repair and replacement parts

New filter system installation

AquaSafe service technicians are trained to troubleshoot any problem with the filter system. This includes pump and motor replacement, filter replacement, filter media recharge (sand, diatomaceous earth (DE), and cartridge), lateral replacement, pool filter system upgrade , filter system re-piping, pump discharge replacement, pressure gauges from 0-60 PSI, vacuum gauges from 0-30 Hg, and flow meters with vertical, horizontal, or side mounts.

Filters are the most important part of the pool filter system; they trap insoluble matter such as dirt, debris, and algae, before they get into the water. We supply and install all filter types, from high rate sand filters that filter particles of about 20-50 microns, to cartridge filters that filter small particles of about 15-25 microns, and to DE filters that are able to trap small particles about 2-5 microns. We also specialize in overhauling and re-charging older commercial filters, lateral replacement, and cartridge replacement.

AquaSafe works with premier builders and developers to design and build efficient pool systems for new construction and development. We will work closely with the project managers to design the perfect system for you.

Cartridge elements replacement  

Chemical Feeders and Chlorinators    

Filter cartridge elements are becoming more popular with the tightening of the local environmental codes. Filter cartridges should be replaced every 2 years to ensure the best performance.

A good chlorinator is the key to keeping water sanitary. We carry many types of chlorinators for use with liquid chlorine, such as peristaltic pumps, diaphragm pumps, and many types of mechanized solid feeders for solid chlorine pucks that attach to the circulation system.

Pump repairs

Motor repair

Our certified pool service technicians are able to troubleshoot problems with the pool pump. The most common repairs include a shaft seal replacement, which must be performed when the seal causes the pump to leak; inadequate low flow rates, which can be caused by a clogged or worn out pump impeller; and the replacement of worn out gaskets, which cause the pool pump to leak. We carry replacement parts for all pump manufacturers.

AquaSafe specializes in all pump motor repairs. The most common repair is a pump motor capacitor replacement, which needs to be performed when the pump motor is humming or will not start, and the bearings are causing the pump to run loudly.

Leak Detection and Leak Repair - click to visit our specialized section

Pressure test

Dye test

Sonic underground leak location

Pressure testing of all individual lines: Skimmer, main drain, return, and vacuum lines. All lines are pressurized up to 20 PSI. Pressure testing is performed to confirm the leak on the underground plumbing and to find out which part of the plumbing the leak is on.

Our certified diver will inspect the entire pool interior under water. Dye testing of the pool interior usually takes about 3 hours depending on the size of the pool. Our diver will dye test the pool fittings, main drains, hydrostatic valves, skimmers, and pool light niches.   

Sonic underground leak location is performed once the leak on the underground plumbing is confirmed. With sonic high resolution equipment we will pin point the exact location of the leak. This will minimize the excavation and digging the pool deck or pool shell.

Underground Leak repair

Skimmer leak repair

Hydrostatic valve replacement

AquaSafe is an expert in underground leak repairs. Whether the leak is located under the pool shell or under the pool deck we will find it and fix it.  

Skimmers are often the cause of a leaking pool. Even when the pool is properly winterized, excessive rain, snow, and low temperatures can cause damage to a skimmer body that will require replacing the entire skimmer. Leaks in the skimmer throat are also very common and are caused by deteriorated grout around the edge of the pool and the skimmer.

Hydrostatic valves are very simple devices that have an extremely important function: They adjust the water pressure that builds up below the pool. This water pressure can cause the entire pool to pop out of the ground. Hydrostatic valves should be regularly inspected and replaced as needed.

Stingl Switch

Vac Alert

VGB Compliant main drains

Pool Plumbing, Skimmers and Main Drains

Underground plumbing repair and replacement

Main drain replacement

Skimmer replacement and Skimmer leak repair

Main drains are suction inlets located on the pool floor. In 2009 all main drains at every pool had to be upgraded according to safety requirements stated in the Virginia Graeme Baker Act. Main drain sumps and main drain covers must comply with the new ASME/ANSIA112.19.8-2007 standards.

Skimmers are often the cause of a leaking pool. Even when the pool is properly winterized, excessive rain, snow, and low temperatures can cause damage to a skimmer body that will require replacing the entire skimmer. Leaks in the skimmer throat are also very common and are caused by deteriorated grout around the edge of the pool and the skimmer.          

Lifeguard Chairs, Handrails and ladder Replacement

AquaSafe supplies and installs all types of handrails and ladders. All handrails and ladders must be properly grounded to the re-bar grid under the pool deck. We also carry special fiberglass handrails that do not require this grounding. 

Pool renovation - Coping, Tiles and Plaster/Whitecoat

Pool Coping replacement

Pool Tile Replacement

Pool Plaster, Re-plastering, Quartz and exposed Pebble pool finish.

Coping - the finishing edge around the pool or spa is a major visual element of the pool. We supply and install various types of coping, pre-cast coping, bricks, and pavers in a variety of shapes, textures, and colors.

We supply and install the largest selection of pool and spa tiles of a natural color and texture palette that you will find anywhere. We carry 6"x6", 3"x3", 2"x2", 1"x1" tiles, glazed tiles, depth markers, and tiles with various signage, such as no diving, no running, etc.  

.  

Plaster, sometimes called marcelite or whitecoat, is the most popular interior finish for pools. The advantages of plaster are that it requires minimal maintenance and it is very durable. The lifetime for plaster is about 6-8 years. We also offer Quartz plaster that contains tiny particles of quartz in many different colors and pebble mix that exposes natural pebbles that come in various colors depending on the different rivers or regions that they come from.

Plaster Patch/Underwater Patch

Sand blast pool interior

AquaSafe offers underwater patching of deteriorated plaster. This repair does not require the pool to be drained and is performed under water by our certified diver with a specialty mix of cement that hardens in water.

AquaSafe offers pool interior sand blasting. Sand blasting is recommended prior to re-painting the pool to ensure the right adhesion of the new coat, when the current paint coat is very deteriorated, or when the customer wishes to plaster the pool that was previously painted.

Vinyl liner replacement, pool paint and sand blast

Vinyl Liner Repacement

Paint pool interior

Sand blast pool interior

AquaSafe specializes in custom made vinyl liners, 20 MIL or 28 MIL. Our trained technicians will take measurements of your pool and will order the perfect fitting liner. We work with the major vinyl liner manufacturers and are able to receive your liner within 7 days from the order. We carry many colors and patterns of the vinyl liners.

AquaSafe is an expert in pool interior painting. Our professionally trained technicians are able to analyze the type of paint that you previously used to assure the best adhesion of the new paint coat. We carry rubber base paint, synthetic rubber paint, epoxy paint, water base acrylic paint and vinyl base paint in different color options.

AquaSafe offers pool interior sand blasting. Sand blasting is recommended prior to re-painting the pool to ensure the right adhesion of the new coat, when the current paint coat is very deteriorated, or when the customer wishes to plaster the pool that was previously painted.

Pool Renovation - Pool deck repairs

Pool deck replacement

Pool deck resurfacing

Pool deck repairs and patch

The pool deck is a finishing touch of a pool or spa installation prior to landscaping. We are experts in concrete decks, stamped concrete, concrete pavers, and stone pavers. Our professional staff will discuss all decking options and types with the customer to ensure 100% customer satisfaction.

When the pool deck has excessive chips on the surface we offer pool deck resurfacing with a special mix of concrete. Deck resurfacing is a less expensive option than replacing the entire concrete pad and it will last many years.  

AquaSafe is an expert in all pool deck repairs and we take cautious measures to prevent any further damage to concrete pool decks. We are experts in saw cut, caulking, and water proofing around water fountains.

Deck caulking and expansion joints

Deck caulking and expansion joint caulking is important in keeping water out of areas that could be damaged during winter, such as water seeping and freezing under coping stones.

Pool Covers and Pool Safety Covers

Pool Cover and Pool Safety Cover

AquaSafe installs custom made pool safety covers. Our most preferred brand is LoopLoc, whose pool safety cover has an extensive lifespan and excellent safety features.